The adhesive of Shockwatch labels is extremely tenacious: once applied, they cannot be removed without damaging the part they have been affixed to. This ensures greater security, since it is difficult to tamper with them.
Depending on their sensitivity, Shockwatch impact indicators will trip at the specific G level they were set for, so as to record the required impact force that the transported product has been subjected to.
Tiltwatch tilt indicators change colour if the packaging has been tilted by more than 80%. Tiltwatch indicators are also available in a ‘Plus’ version, which can indicate an inclination of 30° to 80° for both sides. They can also indicate complete overturning.
ShockLog environmental recorders can be powered with alkaline or lithium batteries, i.e. rechargeable batteries. The battery life of the ShockLog will change depending on the type of batteries.
A ShockLog environmental recorder is capable of working on 3 axes.
When applying a ShockWatch 2 impact indicator, it is important that you press down firmly on the center of the device once on the package to ensure adhesion. Failure to press down on the center of the device will not appropriately activate the intended adhesion, increasing the risk of falling off the package. Video demonstration of ShockWatch 2
2015 © Propagroup. ALL Rights Reserved.
Italiano
English
Español
Français
Deutsch